Free nursery layout planner · runs in your browser
Map what fits. Keep what is unknown visible.
Start from a small, standard or shared-room layout, or enter your own room. Drag furniture into place on the scaled plan (or use the keyboard and exact number fields), then add fixed features, manuals, checks, and budget assumptions. The tool surfaces geometry conflicts, unresolved source checks, and design guidance without certifying or scoring the room.
Local storage
Saved in this browser; export a portable project file when needed.
Explicit limits
No whole-room safe/unsafe label, medical review, certification, or recall determination.
Useful handoff
Print measurements, items, checks, unknowns, sources, and budget context, or send a share link that holds the plan.
Local project controls
Preparing local project… Room and product details are not sent through a planner API.
Ready-made layouts
Start from a room like yours.
Each layout places the planner's generic furniture in a small, standard or shared room, and each one passes the planner's own fit, collision, door-swing and route checks. Load one, then drag pieces around and replace every measurement with your room's.
Small room
240 × 270 cm
A crib, dresser and feeding chair for a compact dedicated nursery.
Crib on the wall opposite the window, away from the window and the outlet
Feeding chair beside the crib, dresser in the far corner
Door swing kept clear, with a walkable route from the door to the crib
Standard room
300 × 360 cm
Room for closed storage and a rug alongside the crib, dresser and chair.
Crib on the wall opposite the window, away from the window and the outlet
Dresser and storage on the walls away from the crib
Rug in the open middle of the room, outside the door swing
Shared room
360 × 420 cm
A nursery zone in a room that also holds an adult bed.
Adult bed in one corner, crib in the opposite corner
Crib away from the window and the outlet, chair beside it
Dresser on the door wall, with a clear route from the door to the crib
These are starting points, not a check of your room. Each one begins with an example door swing and a window whose cord state is unknown: set the real door, window and outlet positions, use your products' exact dimensions, and work through the open prompts below.
1 · Room geometry
Measure first.
Add doors, windows, cords, outlets, heat, stairs or landings, and fixed furniture. Values use the selected unit.
Starting canvases—not minimums
door
Entry door
The wall-derived coordinate stays fixed. Span, thickness, and position are clamped to the measured room when this opening or the room changes.
window
Window
The wall-derived coordinate stays fixed. Span, thickness, and position are clamped to the measured room when this opening or the room changes.
outlet
Outlet
Scaled local plan
My nursery plan
300 × 360 cm
Entry door
Window
Outlet
Select a piece on the plan to move or rotate it.
Drag a piece to move it, or drag its corner handle to rotate it in 15° steps. With a keyboard, Tab to a piece: arrow keys move it 5 cm (Shift: 25 cm), R rotates 90° and [ or ] rotates 15°. Pieces stop at the walls. Exact values stay editable in step 2.
A shown route is the computed planning path and ends at an approach point outside the destination footprint. Walk it in the real room and in low light.
Door outlines mark the entered opening footprint. Shaded swing areas are conservative rectangles—not exact door arcs. Measure and operate the real door to verify both.
Solid rectangles: movable furnitureDotted tan fills: floor coveringsDouble outlines: measured door / threshold footprintShaded dashed areas: conservative inward swing zoneDashed outlines: other fixed features or potential constraintsGreen path + ring: modeled route and approach point
Nighttime route view
Choose endpoints and an editorial planning clearance. This is a circulation heuristic, not an official threshold.
Route found in this plan
The model found a path to an approach point using 60 cm of planning clearance. Walk it in the real room and in low light.
2 · Furniture and floor coverings
Use exact footprints when you have them.
Generic starting sizes are editable assumptions. Rugs sit on a separate floor-covering layer and are checked at edges, doorways, heat, and access points; they are not treated as solid route obstacles or destinations.
crib
Crib
dresser
Dresser
feeding
Feeding chair
storage
Storage
floor covering · rug
Rug
Room and project review
Keep each kind of result separate.
21 open prompts
This review keeps plan conflicts, source-backed checks, missing information, and design guidance separate. Resolve prompts against the real room, live sources, exact manuals and recalls, installers, clinicians, and local rules as appropriate.
Conflicts · 0
Measured footprints or the selected route intersect constraints in this plan; verify each one in the real room.
No conflicts are surfaced by the current entries. This does not prove that none exist in the real room.
Source-backed checks · 0
A current primary source or exact product verification needs your attention.
No source-backed checks are surfaced by the current entries. This does not prove that none exist in the real room.
Unknowns · 21
The project does not have enough confirmed information to resolve these checks.
Cord access has not been confirmed at Window
Inspect the real room and check the current primary-source guidance and product instructions.
Inspect every window covering and reachable cord in the real room, then make cords inaccessible using current CPSC and product instructions.
Identify the exact window-covering product and follow its current installation, retrofit, and maintenance instructions; use a qualified installer where needed.
Manual guidance is not confirmed for Crib
Record whether the current product manual has been reviewed.
Recall check is unknown for Crib
Check the product identifiers against the current official recall database.
Identify applicable furniture, follow the exact furniture and anchor instructions, inspect the wall construction, and use a qualified installer where needed.
Verify the exact product and anchoring-system instructions for the installation surface; use a qualified installer when the instructions or wall construction require one.
Manual guidance is not confirmed for Feeding chair
Record whether the current product manual has been reviewed.
Recall check is unknown for Feeding chair
Check the product identifiers against the current official recall database.
Identify applicable furniture, follow the exact furniture and anchor instructions, inspect the wall construction, and use a qualified installer where needed.
Verify the exact product and anchoring-system instructions for the installation surface; use a qualified installer when the instructions or wall construction require one.
Manual guidance is not confirmed for Rug
Record whether the current product manual has been reviewed.
Recall check is unknown for Rug
Check the product identifiers against the current official recall database.
Identify applicable furniture, follow the exact furniture and anchor instructions, inspect the wall construction, and use a qualified installer where needed.
Verify the exact product and anchoring-system instructions for the installation surface; use a qualified installer when the instructions or wall construction require one.
Check window-covering and equipment cords
This checklist item has not been confirmed or marked not applicable.
Inspect every window covering and reachable cord in the real room, then make cords inaccessible using current CPSC and product instructions.
Identify the exact window-covering product and follow its current installation, retrofit, and maintenance instructions; use a qualified installer where needed.
Confirm clearances with manuals or installers
This checklist item has not been confirmed or marked not applicable.
Walk the nighttime route with the real room in low light
This checklist item has not been confirmed or marked not applicable.
Confirm currency, region, date, and estimate inclusions
This checklist item has not been confirmed or marked not applicable.
Design guidance · 0
Planning suggestions kept separate from measured conflicts and source-backed checks.
No design guidance are surfaced by the current entries. This does not prove that none exist in the real room.
3 · Printable project checklist
Checked, not applicable, or unknown—never silently resolved.
The status describes your project record, not a safety outcome. Source-linked items display the current US source records beside them.
measurements
Measure room width, depth, and height
sleep space
Review current primary-source sleep-space guidance
Identify applicable furniture, follow the exact furniture and anchor instructions, inspect the wall construction, and use a qualified installer where needed.
Verify the exact product and anchoring-system instructions for the installation surface; use a qualified installer when the instructions or wall construction require one.
Inspect every window covering and reachable cord in the real room, then make cords inaccessible using current CPSC and product instructions.
Identify the exact window-covering product and follow its current installation, retrofit, and maintenance instructions; use a qualified installer where needed.
heat air
Confirm clearances with manuals or installers
circulation
Walk the nighttime route with the real room in low light
budget
Confirm currency, region, date, and estimate inclusions
4 · Editable planning assumptions
Budget context that says what it means.
All values are user-entered planning assumptions—not current prices, quotes, offers, availability, or recommendations.
USD 0
Carry this plan into the real-world checks.
Follow current primary sources, exact product manuals and recall identifiers, wall and electrical conditions, qualified installers, clinicians for individual medical questions, and local guidance outside the United States. Do not put child health information, serial numbers, addresses, or other sensitive data into the project file.